Data Displayed; Function Key Operations - Cabletron Systems SmartSwitch 1800 User Manual

Operation

Data Displayed

Function Key Operations

2
To invoke the program, enter
to the following:
PF 1-Help 3-End 4-Ln Statu s 5-Frm Rly 6-Cfg 7-Pg u p 8-Pg d n 9-Restart 11-Rfsh
R -S Service
Poin t Name
BD0N VSP
BD1N VSP
BD2N VSP
Service Point Name
Status – is the status (active or inactive) of the PU.
– will always be
Prod Type
Software Version – is the current version of the Cabletron software.
– is always
Config Name
Last Loaded – is the time of the last IPL.
Pressing one of the function keys listed below will perform the appropriate operation:
– will display a "road map" of the panels (screens), shown in
[PF1] Help
Figure 2.
– will exit to the NCCF (NetView Controls Command Facility).
[PF3] End
,
[PF7] [PF8] Pg_up,Pg_down
information to display.
– will re-display the screen with updated values.
[PF11] Rfsh
from the NCCF. This will display a screen similar
NSS
SD LC Internetwork S tatus Panel
Prod Softw are Con fig
S tatus Type Version Name
A CTIV OLX 3200 OLXCONF
I NAC T
A CTIV OLX 3200 OLXCONF
Figure 1 Main Status Panel
.
OLX
.
OLXCONF
– will scroll the screen up or down if there is more
Last Load ed
Date Time
11Feb1998 17:45
12Feb1998 08:52
NetView Service Point