Setup; Basic - Panasonic WV-V1170 Operating Instructions Manual

7. Setup

7.1

Basic

The [Basic] tab includes the local host setup and the date/time setup.
The date and time interface is shown as in Figure 7-1.
Refer to the following sheet for detailed information.
Parameter
Camera title
Date/time
Time display format
Date/Time display format
Time zone
Summer time(daylight saving)
Start time & date
End time & date
Camera title/Time on screen
Language
Video Standard
TVOut
Figure 7-1
It is to set device name.
Set date and time.
Click the [Sync PC] to set PC time to camera.
There are two options: 24-H and 12-H.
Here you can select date format from the dropdown list.
The time zone of the device.
Here you can set the begin time and end time of the daylight saving
time. You can set according to the date format or according to the
week format.
You can set "Start time & date" and "End time & date" for Summer
time(daylight saving).
Link Overlay
("Image/Audio" or [Image] →[Image/Audio] or [Image] →[Overlay])
You can select the language from the dropdown list.
This is to display video standard such as NTSC/PAL.
If this is changed, the camera reboots automatically.
You can open or close the function, it can only be supported by the
devices with TV Out.
Function
27