Table of Contents
Advertisement
Bit Rate
I Frame Interval
7.2.1.2
Snapshot
The [Snapshot] interface is shown as in Figure 7-3.
Refer to the following sheet for detailed information.
Parameter
Snapshot Type
Image capture size
Quality
Interval
In CBR, the bit rate here is the max value. In dynamic video,
system needs to low frame rate or video quality to guarantee the
value.
•
The value is null in VBR mode.
Refer to recommend bit rate for the detailed information.
Here you can set the P frame amount between two I frames. The
value ranges from 1 to 150. Recommended value is frame rate.
Figure 7-3
There are two modes: General (schedule) and Event (activation).
It is the same with the resolution of the Main Stream.
It is to set the image quality. There are six levels.
It is to set snapshot frequency. The value ranges from 1s to 7s.
There is "Customized" (1-50000S) mode.
Function
30
Advertisement
Table of Contents
