Panasonic WV-V1170 Operating Instructions Manual page 66

Panasonic alarm protocol notification
[Panasonic alarm protocol]
Select "ON" or "OFF" to determine whether or not to provide notification by Panasonic alarm protocol
according to the settings for the "Alarm" checkboxes of "Destination of notification" below.
- When an alarm is detected ("Alarm")
- Default: OFF
Note
When "ON" is selected, notification of the alarm occurrence will be provided to the registered destination
server addresses in order (to IP address 1 first, to IP address 8 last).
[Destination port]
Select a destination port for the Panasonic alarm protocol from the following.
- Available range: 1 - 65535
- Default: 1818
[Retry times]
Select a retry time for the Panasonic alarm protocol.
- Available range: 0-30
- Default: 2
Destination of notification
[Address 1] - [Address 8]
Enter the destination IP address of the Panasonic alarm protocol from the following. Up to 8 destination
server addresses can be registered.
- [Alarm] checkbox: When the checkbox is checked, the Panasonic alarm notification will be provided upon
an alarm occurrence.
[Destination server address]: Enter the destination server address.
Figure 7-43-1
62