Table of Contents
Advertisement
Modify group
Click the [Modify group] button. You can see an interface is shown as in Figure 7-60.
Here you can modify group information such as remarks and rights.
PTZ Settings
7.6.2.
PTZ can be controlled by connecting external devices (Pan/tilt head, etc.) to the RS485 port on the rear of
the camera using a RS485 cable. Perform setting after checking the specification of the device to be
connected. Refer to the operating instructions of the external device to be connected for further information.
The PTZ settings interface is shown as in Figure 7-61.
Figure 7-59
Figure 7-60
72
Advertisement
Table of Contents
