Panasonic WV-SF330 Series Installation Manual
Network camera wv-sf330 series; wv-sf340 series;
Hide thumbs
Also See for WV-SF330 Series:
- Operating instructions manual (102 pages) ,
- Operating instructions manual (102 pages) ,
- Operating instructions manual (220 pages)
Table of Contents
Advertisement
This manual covers the models: WV-SF330 Series (WV-SF336, WV-SF335,
WV-SF332, WV-SF336E, WV-SF335E, WV-SF332E) and WV-SF340 Series
(WV-SF346, WV-SF342, WV-SF346E, WV-SF342E)
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Model No.
WV-SF336
Before attempting to connect or operate this product,
Installation Guide
Network Camera
WV-SF330 Series
WV-SF340 Series
WV-SF346
Advertisement
Table of Contents
Related Manuals for Panasonic WV-SF330 Series
Summary of Contents for Panasonic WV-SF330 Series
-
Page 1: Installation Guide
Model No. WV-SF340 Series WV-SF336 WV-SF346 This manual covers the models: WV-SF330 Series (WV-SF336, WV-SF335, WV-SF332, WV-SF336E, WV-SF335E, WV-SF332E) and WV-SF340 Series (WV-SF346, WV-SF342, WV-SF346E, WV-SF342E) Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. - Page 2 WARNING: • Apparatus shall be connected to a mains sock- et outlet with a protective earthing connection. • The mains plug or an appliance coupler shall remain readily operable. • To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. •...
- Page 3 We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit den folgenden Normen oder normativen Dokumenten übereinstimmt.
-
Page 4: Table Of Contents
Contents Important safety instructions ......................5 Limitation of liability ........................6 Disclaimer of warranty ........................6 Preface ............................7 About notations ..........................7 Main functions ..........................8 About the user manuals ........................ 9 System requirements for a PC ...................... 9 Trademarks and registered trademarks.................. -
Page 5: Important Safety Instructions
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instruc- tions. -
Page 6: Limitation Of Liability
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:... -
Page 7: Preface
Preface The network cameras WV-SF330 series and WV-SF340 series are designed to operate using a PC on a network (10BASE-T/100BASE-TX). By connecting to a network (LAN) or the Internet, images and audio from the camera can be moni- tored on a PC via a network. -
Page 8: Main Functions
Main functions H.264/MPEG-4 and JPEG triple encoding H.264/MPEG-4 dual stream output and JPEG output can be simultaneously provided. * Either H.264 or MPEG-4 is selectable. Wide dynamic range function This function compensates brightness so that it produces clearer images even if objects have vari- ous illumination intensities. -
Page 9: About The User Manuals
About the user manuals There are 2 sets of operating instructions for the WV-SF336, WV-SF335, WV-SF332, WV-SF346, WV-SF342 (NTSC model), WV-SF336E, WV-SF335E, WV-SF332E, WV-SF346E, WV-SF342E (PAL model) as follows. • Installation Guide: Explains how to install and connect devices. • Operating Instructions (PDF): Explains how to perform the settings and how to operate this camera. -
Page 10: Trademarks And Registered Trademarks
Important: • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable. • Audio may not be heard if a sound card is not installed on a PC. Audio may be interrupted depending on the network environment. -
Page 11: Network Security
Network security As you will use this unit connected to a network, your attention is called to the following security risks. q Leakage or theft of information through this unit w Use of this unit for illegal operations by persons with malicious intent e Interference with or stoppage of this unit by persons with malicious intent It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks. -
Page 12: Precautions
Precautions Refer installation work to the dealer. Avoid installing this bracket in the loca- Installation work requires technique and experi- tions where salt damage occurs or corro- ences. Failure to observe this may cause fire, sive gas is produced. electric shock, injury, or damage to the prod- Otherwise, the mounting portions will deterio- uct. - Page 13 Turn the power off when cleaning of this Product disposal/transfer product. Images saved on the SDHC/SD memory card may lead to personal information leakage. Failure to observe this may cause injury. When it is necessary to dispose or give this [Precautions for use] product to someone, even when for repair, make sure that there is no data on the hard...
- Page 14 • When some SDHC/SD memory cards are AVC Patent Portfolio License used with this product, the product may THIS PRODUCT IS LICENSED UNDER THE not work properly or performance deterio- AVC PATENT PORTFOLIO LICENSE FOR THE ration may be caused. Use the SDHC/SD PERSONAL USE OF A CONSUMER OR memory cards recommended in page 46.
-
Page 15: Precautions For Installation
Precautions for Installation Panasonic assumes no responsibility for injuries or property damage resulting from fail- ures arising out of improper installation or operation inconsistent with this documenta- tion. This camera is designed to be used Be sure to remove this product if it is not indoors. - Page 16 Radio disturbance When this product is used near TV/radio anten- na, strong electric field or magnetic field (near a motor, a transformer or a power line), images may be distorted and noise sound may be pro- duced. PoE (Power over Ethernet) Use a PoE hub/device that is compliant with IEEE802.3af standard.
-
Page 17: Major Operating Controls
Major operating controls SF336 SF335 SF332 SF346 SF342 Dome cover Inner dome Inner dome Clear dome (Provided only for service) SF346 SF342 Monitor out connector for Dome cover fixing screw hole service* Direction marker for installation SF336 SF335 SF332 Dome cover fixing projection SF336 SF335 SF332... -
Page 18: Side View
<Side view> SDHC/SD memory card slot Access indicator (blinking at accessing) Link indicator (lighting at linking) Focus assist (F.A.) Auto focus (AF) button INITIAL SET button SF335 SF332 SF342 button SF336 SF346 FOCUS ASSIST SDHC/SD memory card error indicator/AF indicator (Blinks when AF is being adjusted) SF336... -
Page 19: Detaching The Dome Cover
Detaching the dome cover Detach the dome cover from the camera by removing the dome cover fixing screw. SF336 SF335 SF332 The following procedure is required when using WV-SF336, WV-SF335 or WV-SF332. Refer to page 20 when using WV-SF346 or WV-SF342. Important: • After removal, retain the dome cover fixing screw so as not to lose. The screw is required when attaching the dome cover. - Page 20 Detach the dome cover from the camera by loosening the dome cover fixing screws. SF346 SF342 The following procedure is required when using WV-SF346 or WV-SF342. Refer to page 19 when using WV-SF336, WV-SF335 or WV-SF332. Important: • Remove the cover film from the dome section of the dome cover after the installation is com- plete. Do not touch the dome section by hand directly after removing the cover film. Loosen the dome cover fixing screws using the bit for tamperproof screw (accessory).
-
Page 21: Preparations
Preparations When installing the camera on a wall or a ceiling, there are four methods as specified below. (☞ Pages 22 and 23) • Using the two-gang junction box • Installing the camera directly on the ceiling or wall • Using the ceiling mount bracket WV-Q174 (option) (for embedded installation on a ceiling) SF336 SF335 SF332... -
Page 22: Method Of Camera Installation
Using the side cable access hole When installing the camera directly on the ceiling or wall with cables exposed, cut out a portion of the dome cover to open a cable access hole. SF336 SF335 SF332 SF346 SF342 Side cable access hole Side cable access hole LOCK OPEN... - Page 23 Installing the camera directly on the ceiling or wall Place the installation template label (accessory) on the ceiling or wall, and make a hole to pass the cable. Remove the template label, and mount the camera by fixing 4 screws (locally procured). (☞ Page Side cable access hole Direction marker for installation Recommended screw (M4: 4 pcs.)
-
Page 24: Insert/Remove An Sdhc/Sd Memory Card
Insert/remove an SDHC/SD memory card Important: • Before inserting the SDHC/SD memory card, turn off the power of the camera first. • When inserting an SDHC/SD memory card, make sure the direction. • Before removing the SDHC/SD memory card, select "Not use" for "SD memory card" on the [SD memory card] tab of the setup menu first. Turn off the power after "Not use" selection, and then unload the SDHC/SD memory card. When the SDHC/SD memory card is inserted or removed with the power on, data in the SDHC/SD memory card may be damaged. -
Page 25: Connection
Connection Caution: • FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. Before starting the connection, turn off the power of this camera and the devices to be connected. Check and prepare the required devices and cables for connection. Note: • Since the connector storage section does not have a suffi- cient space, use audio cables 9 mm {11/32... - Page 26 Important: • Connect/disconnect the audio cables and turn on the power of the camera after turning off the power of the audio output devices. Otherwise, loud noise may be heard from the speaker. Audio output Connect an external speaker with amplifier to connector the audio output connector (for use of the audio transmission function). Connect a stereo mini plug (ø3.5 mm) (audio output is monaural).
- Page 27 Important: • Do not connect 2 wires or more directly to a terminal. When it is necessary to connect 2 wires or more, use a splitter. • Connect an external device with verifying that the ratings are within the specifications below. • When using the external I/O terminals as the output terminals, ensure they do not cause signal collision with external signals. <Ratings> • ALARM OUT, AUX OUT Output specification: Open collector output (maximum applied voltage: 20 V DC) Open: 4 V - 5 V DC by internal pull-up Close: Output voltage 1 V DC or less (50 mA or less) • ALARM IN Input specification: No-voltage make contact input (4 V - 5 V DC, internally pulled up)
- Page 28 Important: • Be sure to use the power cord plug provided with this product. • Be sure to fully insert the power cord plug (accessory) into the 12 V DC power supply terminal. Otherwise, it may damage the camera or cause malfunction. • Be sure to use an AC adaptor compliant with the Specifications regarding power source and power consumption. (☞ Page 43) t Run the 12 V DC output cable through the gap of the cable hook. 12 V DC output cable Cable hook When using PoE (IEEE802.3af compliant) Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub)
- Page 29 Connection example when connecting to a network using a PoE hub Video monitor (for adjustment use only) Speaker with amplifier PoE device (hub) (option) LAN cable (category 5 or better, straight, STP*) LAN cable (category 5 or Microphone (option) better, straight, STP*) Speaker with amplifier (option) LAN cable (category 5 or...
-
Page 30: Installation
Installation Camera mounting Installation shall be conducted after turning off each device. Detach the dome cover. (☞ Pages 19 and 20) Connect the cables to the camera. (☞ Pages 25 - 29) As necessary, use a cable tie (accessory) to assemble the cables. Mount the camera. -
Page 31: Adjustment
Adjustment Detach the inner dome from the camera by picking the front and rear sides. SF346 SF342 Note: • Do not touch the lens. Pick the portion marked in the illustration as well as the opposite side. Adjust the camera angle. When determining the camera angle, repeat fine adjustments by gradually moving the panning table, tilting table, and azimuth adjustment ring. - Page 32 Vertical position (Tilting) Loosen the tilting lock screws (x2), and rotate the tilting table to adjust the tilting direction. (Adjustable range: ±75 °) Since a variable focal lens is used, it is possible to change the angu- lar field of view. This lens can also be rotated in the reverse direction, but the image azimuth is reversed.
- Page 33 Adjust the angular field of view and the focus. SF336 SF346 Adjust the angular field of view in accordance with the distance between the camera lens and a photographic subject. Auto focus (AF) button Zoom lock knob Focus ring Loosen Tighten q Loosen the zoom lock knob and move the knob between TELE and WIDE to obtain the appro- priate angle of view.
- Page 34 • Subj. with low illuminance • Subj. with reflection or extra brightness • Subj. through a window • Subj. with less contrast such as white wall • Subj. with heavy flicker Adjust the angular field of view and the focus. SF335 SF332 SF342 The angular field of view and focus can be adjusted in accordance with the distance between the camera lens and a photographic subject. These adjustments shall be performed together with the camera angle adjustment.
- Page 35 y When the focus ring is moved, the current focus position will be indicated on "INDICATOR". Adjust the focus position so that the indicator value goes close to the "PEAK HOLD" position. u When the indicator value goes to the best focus position, "BEST FOCUS" will be displayed in reverse at the lower right corner of the screen.
-
Page 36: Attaching The Dome Cover
Attaching the dome cover Attach the dome cover to the camera. SF336 SF335 SF332 The following procedure is required when using WV-SF336, WV-SF335 or WV-SF332. Refer to page 38 when using WV-SF346 or WV-SF342. Marker Align the indication "OPEN" to the maker of the camera to attach the dome cover. - Page 37 Important: • For inner dome adjustments, adjust the marker to the "ADJUST" position. If the dome section is moved with unreasonable force from the "LOCK" position, this may be a cause of destruc- tion. Rotate the dome cover clockwise to adjust the marker to "LOCK". Fix the dome cover and the camera with the dome cover fixing screw (M3, step LOCK OPEN ADJUST...
- Page 38 Attach the dome cover to the camera. SF346 SF342 The following procedure is required when using WV-SF346 or WV-SF342. Refer to page 36 when using WV-SF336, WV-SF335 or WV-SF332. Attach the inner dome to the camera in the same manner as the procedure in page Make sure that the tilting lock screws of the camera and the holes on the inner dome are correctly fit together.
- Page 39 Remove the cover film completely. Push down the auto focus (AF) button with a ballpoint pen to adjust the focus again. SF346 Refer to page 33 for further information about adjustment. Auto focus (AF) button Important: • Before attaching the dome cover, make sure that the subject is present.
-
Page 40: Configure The Network Settings
When using multiple cameras, it is necessary to configure the network settings of each camera independently. If the Panasonic IP setting software does not work, configure the network settings of the camera and the PC individually on the "Network" page of the setup menu. Refer to the Operating Instructions (PDF) for further information. - Page 41 Start the Panasonic IP setting software by double-clicking the "EasyIpSetup.exe" icon on the provided CD-ROM. Click the [IP setting] button after selecting the MAC address/IP address of the camera to be configured. Note: • When using a DHCP server, the IP address...
-
Page 42: Troubleshooting
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Reference Symptom Cause/solution pages When using DC power supply... -
Page 43: Specifications
Specifications ● Basic Power source: 12 V DC, PoE (IEEE802.3af compliant) Power consumption: SF336 SF346 12 V DC*: 320 mA, PoE: 4.2 W (Class 2 device) SF335 SF332 SF342 12 V DC*: 280 mA, PoE: 3.5 W (Class 2 device) * FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. - Page 44 Minimum illumination: (1280×960) SF336 SF335 SF346 Color: 0.3 lx {0.03 footcandle} (F1.3, Auto slow shutter: Off (1/30 s), AGC: High) 0.019 lx {0.0019 footcandle} (F1.3, Auto slow shut- ter: max. 16/30 s, AGC: High)* 0.2 lx {0.02 footcandle} (F1.3, Auto slow shutter: Off (1/30 s), AGC: High) 0.013 lx {0.0013 footcandle} (F1.3, Auto slow shut- ter: max.
- Page 45 ● Network Network: 10BASE-T/100BASE-TX, RJ45 connector Resolution: Aspect ratio: 4:3 SF336 SF335 SF346 H.264 1280×960/ VGA (640×480)/ QVGA (320×240), max. 30 fps MPEG-4 VGA (640×480)/ QVGA (320×240), max. 30 fps JPEG 1280×960/ VGA (640×480)/ QVGA (320×240), max. 30 fps Aspect ratio: 16:9 H.264 1280×720/ 640×360/ 320×180, max.
- Page 46 Up to 16 camera images can be displayed simultaneously on a multi-screen. Compatible SDHC/SD memory card (option): Manufactured by Panasonic SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 256 MB, 512 MB, 1 GB, 2 GB (except miniSD card and microSD card) *1 Either H.264 or MPEG-4 is selectable.
-
Page 47: Standard Accessories
Standard accessories Installation Guide (this document) ..........1 pc. Warranty card (NTSC model only) ..........1 pc. CD-ROM* ................1 pc. Code label* ................1 pc. *1 The CD-ROM contains the operating instructions (PDFs) and different kinds of tool software programs. - Page 48 Panasonic Marketing Europe GmbH Three Panasonic Way, Secaucus, Winsbergring 15, 22525 Hamburg F.R.Germany New Jersey 07094 U.S.A. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca © Panasonic System Networks Co., Ltd. 2010 Ns0410-4021 3TR006433EZA Printed in China...