Table of Contents
Advertisement
Parameter
Focus
Adjust the sharpness length of the lens by clicking or long pressing the [+]/[-] button or
moving the slider. Step length (Speed) is used to adjust the length of one step with one
click.
Auto Focus
Click to adjust the image definition automatically.
Note:
Other lens operations are not allowed during the process of auto-focus.
Restore All
Reset the lens to zero position to eliminate the accumulative error of lens.
Note:
Reset when the image adjustment is not clear or operating focus many times.
Refresh
Synchronize the location of drag slider of lens and focus after hardware focusing.
Display Mode
2.5.2.
Click the button and display mode interface will show up on the Encode Setup interface .
See Figure 2-13, single click to switch display mode.
Display mode includes three modes which are 1P, 1P+3 and 1P+5.
1P: Original picture
1P+3: Original picture and three trigger track windows, it can adjust the location and size of
three trigger track windows on the original picture.
1P+5: Original picture and five trigger track windows, it can adjust the location and size of five
trigger track windows on the original picture.
Function
Figure 2-13
11
Advertisement
Table of Contents
