Table of Contents
Advertisement
Click "Read & Write" to set the SD card as read & write.
•
Click "Hot Swap" to realize hot swap upon the SD card.
•
Click "Format" to realize formatting upon the SD card.
•
7.5.2.3
FTP
The [FTP] interface is shown as in Figure 7-53.
You need to check the box to enable the FTP function. When network disconnect occurred or there is
malfunction.
Emergency storage can save the record/snapshot picture to the local SD card.
Parameter
Enable
Server Address
Port
User name
Password
Remote Directory
Emergency (Local)
Record Control
7.5.3.
The [Record Control] interface is shown as in Figure 7-54.
Figure 7-53
Click it to enable FTP function
FTP server address
FTP server port
User name used to log in FTP server.
Password used to log in FTP server.
Store it to the directory of FTP server.
Click it and it will store to local SD card when FTP storage abnormity
occurs.
Figure 7-54
Note
68
Advertisement
Table of Contents
