Table of Contents
Advertisement
Refer to the following sheet for detailed information.
Parameter
Authentication
Username
Password
QoS
7.3.10.
The [QoS] interface is shown as below. See Figure 7-31.
QoS (Quality of Service) is network security mechanism. It is a technology to fix the network delay and jam
problem and etc. For the network service, the quality of service includes the transmission bandwidth, delay,
the packet loss and etc. We can guarantee the transmission bandwidth, lower the delay, reduce the loss of
the data packet and anti-dither to enhance the quality.
We can set the DSCP (Differentiated Services Code Point) of the IP to distinguish the data packet so that
the router or the hub can provide different services for various data packets. It can select the different
queues according to the priority of the packets and select the bandwidth of the each queue. It can also
discard at the different ratio when the broad bandwidth is jam.
Figure 7-30
PEAP (protected EAP protocol).
It needs the username to login, which is authenticated by the server.
Input password here.
Function
51
Advertisement
Table of Contents
