Table of Contents
Advertisement
NTP Setup
NTP Server
NTP Port
Update period
7.2
Image/Audio
Image/Audio
7.2.1.
7.2.1.1
Image
The video bit stream interface is shown as below. See Figure 7-2.
Refer to the following sheet for detailed information.
Parameter
Aspect ratio
Main Stream
Compression
Image capture size There are multiple resolutions. You can select from the dropdown
Frame rate(FPS)
Transmission
Priority
You can check the box to enable NTP function.
You can set the time server address.
It is to set the time server port.
It is to set the sync periods between the device and the time server.
Figure 7-2
Select an image aspect ratio from 16:9 and 4:3.
There are five options: H.264, H.264B, H.264H and H.265
encode.
H.264: Main profile encode mode.
•
•
H.264B: base line profile encode mode.
H.264H: High profile encode mode.
•
H.265: Main profile encode mode.
•
list.
For each resolution, the recommended bit stream value is
•
different.
NTSC: 1-30fps, PAL: 1-25fps
The frame rate may vary due to different resolutions.
Note:
・When Aspect ratio is set to 4:3 and Image capture size is set to
4000x3000, max frame rate is 20 fps.
There are two options: VBR and CBR.
Note that you can set video quality in VBR mode.
Function
28
Advertisement
Table of Contents
