Table of Contents
Advertisement
DG-FS1510HPE User Guide
Administrator -> Reboot Device
Provide a safe way to reboot the system. Click Reboot to restart the switch.
6.3 Port Management
Port Management -> Port Configuration
In this page, the status of all ports can be monitored and adjusted for optimum configuration.
Enable: Enable or disable the port's connection
Auto-Nege: Enable or disable port auto-NDI/MDIX
Speed: Copper connections can operate in Forced Mode settings (1000M Full, 100M Full, 100M
Halt, 10M Full, 10M Half), Auto, or Disabled. The default setting for all ports is Auto.
16
Advertisement
Table of Contents
