Digisol DG-FS1510HPE User Manual
  1. Manuals
  2. Brands
  3. Digisol Manuals
  4. Network Router
  5. DG-FS1510HPE
  6. User manual

Digisol DG-FS1510HPE User Manual

8 port 10/100 mbps web managed poe switch, 2 combo gbe ports
Hide thumbs Also See for DG-FS1510HPE:
Table of Contents

Advertisement

Quick Links

Download this manual
DG-FS1510HPE
8 PORT 10/100 MBPS WEB MANAGED POE SWITCH, 2
COMBO GBE PORTS

User Manual

V1.0
2015-05-11
As our products undergo continuous development the specifications are subject to change without prior notice

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DG-FS1510HPE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Digisol DG-FS1510HPE

Summary of Contents for Digisol DG-FS1510HPE

  • Page 1: User Manual

    DG-FS1510HPE 8 PORT 10/100 MBPS WEB MANAGED POE SWITCH, 2 COMBO GBE PORTS User Manual V1.0 2015-05-11 As our products undergo continuous development the specifications are subject to change without prior notice...
  • Page 2 Trademarks: DIGISOL™ is a trademark of Smartlink Network Systems Ltd. All other trademarks are the property of the respective manufacturers. Safety This equipment is designed with the utmost care for the safety of those who install and use it.

  • Page 3: Table Of Contents

    4.1.1 Package Contents ..............10 4.1.2 Optional Accessories and Tools ..........10 4.1.3 Choosing the Installation Location ......... 10 4.1.3.1 Installing the DG-FS1510HPE on the Work Platform .. 10 4.1.3.2 Installing the DG-FS1510HPE on a Rack ....11 4.2 Hardware Description ................ 11 4.2.1 Front Panel ................
  • Page 4 DG-FS1510HPE User Manual 7.3.4 Loading Default Settings ............20 7.3.5 Firmware Update ..............21 7.3.6 Reboot the Device ..............21 7.4 POE ....................22 7.4.1 PoE Status ................22 7.4.2 PoE Setting ................23 7.4.3 PoE Power Delay ..............24 7.4.4 PoE Scheduling..............
  • Page 5 DG-FS1510HPE User Manual 7.12.1 DHCP Relay Agent .............. 51 7.12.2 Relay Server ................ 52 7.12.3 VLAN MAP Relay Agent ............52 7.13 Configuration Backup and Recovery ..........53 7.14 Miscellaneous Configuration ............54 7.15 SNMP Settings ................55 7.16 Logout .................... 56 8 Troubleshooting .....................

  • Page 6: Precautions

    DG-FS1510HPE User Manual Precautions Power supply sockets with too heavy load or broken cables and plugs may cause electric shock or fire. Users should check the power supply wires and cables regularly. If there is any breakage, please replace the cable at once.

  • Page 7: Overview

    DG-FS1510HPE User Manual Overview The DG-FS1510HPE is an intelligent Layer 2 Ethernet switch. It provides 8 10M/100M self-adaptive Ethernet ports and 2 gigabit combo ports. The combo ports can be flexibly connected to gigabit copper cable or backbone fiber. You can select 1000BASE-LX, 1000BASE-SX or 1000BASE-T interface according to the transmission distance.

  • Page 8: Technical Specifications

    DG-FS1510HPE User Manual Technical Specifications 3.1 Environment Requirements The whole device can survive in a wide range of operating temperature and can work normally and stably in tough environment. Operating temperature: 0˚C—50˚C Storage temperature: -40˚C—70˚C Relative humidity: 10%—90% RH (non-condensing) 3.2 Power Interface...

  • Page 9: Physical Characteristics

    DG-FS1510HPE User Manual 3.5 Physical Characteristics Dimensions: 330(W) x 44(H) x 230(D) mm Net Weight: 2.5 kgs...

  • Page 10: Device Installation And Description

    On a rack 4.1.3.1 Installing the DG-FS1510HPE on the Work Platform The common way is to install the DG-FS1510HPE on a clean work platform. Pay attention to the following precautions: Ensure that the work platform is flat and stable. Ensure good ventilation of air ports on both sides of the device.

  • Page 11: Installing The Dg-Fs1510Hpe On A Rack

    DG-FS1510HPE User Manual 4.1.3.2 Installing the DG-FS1510HPE on a Rack Before installing the DG-FS1510HPE on a rack, you need to install the provided L- Clamps on both sides of the DG-FS1510HPE. 4.2 Hardware Description 4.2.1 Front Panel The following table describes the interfaces of the DG-FS1510HPE.
  • Page 12 DG-FS1510HPE User Manual The following table describes the LED indicators of the DG-FS1510HPE. Interface/Button Status/Color Description Green (ON) Power ON. Power OFF. Amber (OFF) Port disconnected or link fail. Ports (1-8) Port Connected. (Link/Activity LED) Blinking Sending or receiving data.

  • Page 13: Rear Panel

    4.3 Electrical Setup 4.3.1 Setting Up the Power Interface After placing the DG-FS1510HPE to a flat and stable surface, insert the supplied power cord to the power socket, and connect the other end of the cable to the power interface of DG-FS1510HPE.

  • Page 14: Device Startup

    When other indicators blink three times and the Power indicator is always on in green, the switch works normally. Device Upgrade You can upgrade the software through any Ethernet port for DG-FS1510HPE. After software upgrade is complete, the system reboots automatically.

  • Page 15: Web Configuration And Management

    DG-FS1510HPE User Manual Web Configuration and Management The system does not support the CLI and telnet management. It supports the web management only. This section describes the web configuration and management. 7.1 Preparation Before Login Before accessing the switch, ensure the communication between PC and switch is normal.

  • Page 16: Logging In To The Switch

    DG-FS1510HPE User Manual If the PC can read the MAC address of the switch and can ping through the maintenance IP address of the switch, that means the communication of the PC and the switch is normal. 7.2 Logging In to the Switch Open the web browser, and type the default IP address of switch in the address bar as ‗http: //192.168.2.1‘.

  • Page 17: System Management

    DG-FS1510HPE User Manual After logging in to the switch successfully, the following page appears. 7.3 System Management Choose Administrator, and the sub-menus of Administrator are shown as below.

  • Page 18: Authentication Configuration

    DG-FS1510HPE User Manual 7.3.1 Authentication Configuration Choose Administrator > Authentication Configuration, and the following page appears. Read the Note in the page, and change the user name and password. After proper configuration, click Update to apply the settings and then Reboot the device for the...

  • Page 19: System Ip Configuration

    DG-FS1510HPE User Manual 7.3.2 System IP Configuration Choose Administrator > System IP Configuration, and the following page appears. In this page, you can set the maintenance IP address of the switch, subnet mask and gateway. After proper configuration, click Update to apply the settings and then Reboot the device for the...

  • Page 20: System Status

    DG-FS1510HPE User Manual 7.3.3 System Status Choose Administrator > System Status, and the following page appears. In this page, you can view the MAC address, Number of ports, Comment,system version and idle time security. 7.3.4 Loading Default Settings Choose Administrator > Load default setting and the following page appears. In this page, click Load to load the default settings that do not include IP address, user name and password.

  • Page 21: Firmware Update

    DG-FS1510HPE User Manual 7.3.5 Firmware Update Choose Administrator > Firmware Update, and the following page appears. In this page, enter the login password and reenter the password in Reconfirm field. Then click Update. A pop up page will appear asking you to select new file for updating the firmware.

  • Page 22: Poe

    DG-FS1510HPE User Manual 7.4 POE Choose POE, and the submenus of POE are shown as below. 7.4.1 PoE Status Choose PoE> PoE Status and the following page appears displaying: Max available Power, System operation status, Main power consumption, device temperature etc.

  • Page 23: Poe Setting

    DG-FS1510HPE User Manual 7.4.2 PoE Setting Choose PoE > PoE Setting and the following page appears.

  • Page 24: Poe Power Delay

    DG-FS1510HPE User Manual 7.4.3 PoE Power Delay Choose PoE > PoE Power Delay and the following page appears.

  • Page 25: Poe Scheduling

    DG-FS1510HPE User Manual 7.4.4 PoE Scheduling Choose PoE > PoE Scheduling and the following page appears. Here you can schedule on which day and time the PoE ports will be disabled. 7.4.5 NTP Setting Choose PoE > NTP Setting and the following page appears. Set the NTP server 1 and 2.

  • Page 26: Port Management

    DG-FS1510HPE User Manual 7.5 Port Management Choose Port Management, and the submenus of Port Management are shown as below. 7.5.1 Port Configuration Choose Port Management > Port Configuration, and the following page appears. In this page, you can set Tx/Rx Ability, Auto-Negotiation, Speed, Duplex, Pause,...

  • Page 27: Port Mirroring

    DG-FS1510HPE User Manual 7.5.2 Port Mirroring Choose Port Management > Port Mirroring, and the following page appears. In this page, you can enable port mirroring service. The packets from source port transmit to destination port.

  • Page 28: Bandwidth Control

    DG-FS1510HPE User Manual 7.5.3 Bandwidth Control Choose Port Management > Bandwidth Control and the following page appears. After proper configuration, click Update to apply the settings. Click Load Default to restore the default settings.

  • Page 29: Broadcast Storm Control

    DG-FS1510HPE User Manual 7.5.4 Broadcast Storm Control Choose Port Management > Broadcast Storm Control and the following page appears. 7.6 VLAN Setting In large networks, routers are used to isolate broadcast traffic for each subnet into separate domains. This switch provides a similar service at Layer 2 by using VLANs to organize any group of network nodes into separate broadcast domains.

  • Page 30: Vlan Mode

    DG-FS1510HPE User Manual 7.6.1 VLAN Mode 7.6.1.1 VLAN Based on Port Choose VLAN Setting > VLAN Mode, and the following page appears. The default mode is Port Based VLAN. Click Change VLAN mode to change the VLAN mode. Once "Change VLAN mode" is selected, a warning message will appear. Select "Continue"...

  • Page 31: Vlan Based On Tag

    DG-FS1510HPE User Manual 7.6.2.2 VLAN Based on Tag When the VLAN mode is tag based, the VLAN Member Setting page is shown as the following figure. Field Description Select the Vlan ID to be assigned to the VLAN and click on Add to enter the VID.
  • Page 32 DG-FS1510HPE User Manual When the port receives the packets without tag, the system can check the VLAN table according to the port VID. The system can add the tag according to the VID found in the VLAN table. To add vlan, enter a VID and select vlan member for this entry from vlan member list. Now select ―Add‖...

  • Page 33: Multi To 1 Setting Configuration

    DG-FS1510HPE User Manual 7.6.3 Multi to 1 Setting Configuration Choose VLAN Setting > Multi to 1 setting, and the following page appears. This feature can disable communication between ports in order to improve the security. After setting the multi to 1 setting, the VLAN original setting will be cleared.

  • Page 34: Per Port Counter

    DG-FS1510HPE User Manual 7.7 Per Port Counter Choose Per Port Counter, and the Port Counter submenu is shown as below. Choose Per Port Counter > Port Counter and the following page appears. In this page, you can view the packet quantity.

  • Page 35: Qos Configuration

    DG-FS1510HPE User Manual Field Description Select it from the drop-down list: Counter Mode Selection Click Update to view the corresponding packet quantity. Refresh Click the button to refresh the counter information. Clear Click the button to clear the counter information.

  • Page 36: Priority Mode

    DG-FS1510HPE User Manual 7.8.1 Priority Mode Choose QoS Setting > Priority Mode, and the following page appears. In this page, you can set the priority mode. The system supports the following three priority modes. First-In-First-Out All-High-before-Low Weight-Round-Robin Low weight: You can select 0 ~ 7 from the drop-down list.

  • Page 37: Class Of Service Configuration - 1

    DG-FS1510HPE User Manual 7.8.2 Class of Service Configuration - 1 Choose QoS Setting > Port, 802.1p, IP/DS based, and the following page appears. The COS of port supports the following mode. Based on port Based on 802.1p: The priority is determined according to the value of 802.1p (bit [15:13]) in the VLAN Tag.

  • Page 38: Class Of Service Configuration - 2

    DG-FS1510HPE User Manual 7.8.3 Class of Service Configuration - 2 Choose QoS Setting > TCP/UDP Port Based and the following page appears. COS based on TCP/UDP port specifies the priority queues of packets or discards designated protocol packets according to the application layer protocols of packets received at the port. COS...
  • Page 39 DG-FS1510HPE User Manual Field Description You can select it from the drop-down list: Option Port: The valid range is 1 ~ 65535. User_Define Mask: The valid range is 0 ~ 255. Override: When the "override" item is selected, the TCP/UDP port QoS...

  • Page 40: Security

    DG-FS1510HPE User Manual 7.9 Security Choose Security, and the sub-menus of Security are shown as below. 7.9.1 MAC Address Binding Choose Security > MAC Address Binding and the following page appears. After MAC address binding is enabled at a port, only devices whose MAC addresses are consistent with the bound MAC address can communicate through the port.

  • Page 41: Tcp/Udp Filter

    DG-FS1510HPE User Manual The configuration procedure: Step 1 Enter the MAC address. Step 2 Select the port that you want to bind MAC address. Step 3 Select Enable from the drop-down list to enable the binding service. Step 4 Click Update to apply the service of MAC address binding.

  • Page 42: Spanning Tree

    DG-FS1510HPE User Manual The configuration procedure: 1. Select Enable from the drop-down list to enable the TCP/UDP filter service. 2. Select port filtering rule. Negative means the selected protocol will be dropped and other protocols will be forwarded. Positive means the selected protocol will be forwarded and other protocol will be dropped.

  • Page 43: Stp Bridge Settings

    DG-FS1510HPE User Manual 7.10.1 STP Bridge Settings Choose Spanning Tree > STP Bridge Settings, and the following page appears. Field Description You can select it from the drop-down list: STP Mode...
  • Page 44 DG-FS1510HPE User Manual Field Description The valid range is 0 ~ 61440. The lower integer value for Bridge Priority precedence indicates the higher priority and the integer should be a multiple of 4096. The valid range is 1 ~ 10. The unit is seconds. The hello time Hello Time indicates the interval of transmitting BPDU.

  • Page 45: Stp Port Settings

    DG-FS1510HPE User Manual 7.10.2 STP Port Settings Choose Spanning Tree > STP Port Settings, and the following page appears. Field Description Port No. Select it from the drop-down list. Root Path Cost. The valid range is 1 ~ 200000000. 0 indicates Auto.
  • Page 46 DG-FS1510HPE User Manual RPC determines the path cost that is from per port to root bridge. It is related with speed. The following table lists the recommended value. You can modify it during actual using. Speed IEEE Recommended Value Recommended Range...

  • Page 47: Loopback Detection

    DG-FS1510HPE User Manual 7.10.3 Loopback Detection: Choose Spanning Tree > Loopback Detection to configure loopback detection on an interface. When loopback detection is enabled and a port receives it‘s own BPDU, the detection agent drops the loopback BPDU and places the interface in discarding mode. This...
  • Page 48 DG-FS1510HPE User Manual These parameters are displayed: Field Description Loopback Detection Function Enables/Disables (Default: disable) Auto Wake Up Configures the interface for automatic loopback release. Wake-Up Time interval Defines the time interval for the port that will be released from the discarding state.

  • Page 49: Trunking

    DG-FS1510HPE User Manual 7.11 Trunking This section describes how to configure static and dynamic trunks. You can create multiple links between devices that work as one virtual aggregate link. A port trunk offers a dramatic increase in bandwidth for network segments where bottlenecks exist, as well as providing a fault tolerant link between two devices.
  • Page 50 DG-FS1510HPE User Manual Field Description System Priority The valid range is 1 ~ 65535. You can select it from the drop-down list: Link Aggregation Algorithm The system supports three link groups. Link Group 1: It includes the following ports: 1, 2, 3, 4.

  • Page 51: Dhcp Relay Agent

    DG-FS1510HPE User Manual After proper configuration, click Submit to apply the settings. Click Refresh to refresh the state of link group. When the ―--‖ in Member configuration turns into ―A‖, that indicates the trunking service has established between the system and the corresponding end.

  • Page 52: Relay Server

    DG-FS1510HPE User Manual DHCP relay Hop Sets the maximum allowed number in the hops field of the count limit BOOTP/DHCP header. DHCP relay option Select Enable or Disable to start or Stop the DHCP relay option 82 respectively. 82 State 7.12.2 Relay Server...

  • Page 53: Configuration Backup And Recovery

    DG-FS1510HPE User Manual 7.13 Configuration Backup and Recovery Choose Backup/Recovery, and the following page appears. In this page, you can download the switch configuration to PC, or upload the configuration file to switch according to the page attention.

  • Page 54: Miscellaneous Configuration

    DG-FS1510HPE User Manual 7.14 Miscellaneous Configuration Choose Miscellaneous, and the following page appears. In this page, you can enable Aging, VLAN striding and set VLAN uplink.

  • Page 55: Snmp Settings

    DG-FS1510HPE User Manual 7.15 SNMP Settings Choose SNMP Settings, and the following page appears. In this page, you can configure SNMP related parameters. Field Description Community Name. The community name used by SNMP. Access Right The right of community name.

  • Page 56: Logout

    DG-FS1510HPE User Manual 7.16 Logout Choose Logout, and the following page appears. In this page, the system asks you whether to logout. Click Accept to logout. Click Back to return to the previous page. Troubleshooting If a fault occurs, refer to the following table for troubleshooting:...

  • Page 57: Glossary

    DG-FS1510HPE User Manual Glossary Auto-negotiation: Auto-negotiation is an Ethernet procedure by which two connected devices choose common transmission parameters, such as speed, duplex mode and flow control. In this process, the connected devices first share their capabilities as for these parameters and then choose the highest performance transmission mode they both support.
  • Page 58 DG-FS1510HPE User Manual FTP: File Transfer Protocol (FTP) is a standard network protocol used to copy a file from one host to another over a TCP-based network, such as the Internet. FTP is built on client-server architecture and utilizes separate control and data connections between the client and server.
  • Page 59 DG-FS1510HPE User Manual DHCP: Dynamic Host Control Protocol. Provides a framework for passing configuration information to hosts on a TCP/IP network. DHCP is based on the Bootstrap Protocol (BOOTP), adding the capability of automatic allocation of reusable network addresses and additional configuration options.

Table of Contents