Mgbic-Lc01/Mgbic-Mt01 Specifications (1000Base-Sx; Mgbic-02 Specifications (1000Base-T; Mgbic-Lc01/Mgbic-Mt01 Optical Specifications; Mgbic-Lc01/Mgbic-Mt01 Operating Range - Enterasys G3G124-24 Hardware Installation Manual

1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications
Table A-6 Mini-GBIC Input/Output Port Specifications (continued)
Item
MGBIC-LC05
MGBIC-LC07
MGBIC-08
MGBIC-LC09
The specifications for the Mini‐GBICs shown in Table A‐7 through Table
IEEE 802.3z‐1998 standard.

MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)

Table A-7 MGBIC-LC01/MGBIC-MT01 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Link Power Budget
Table A-8 MGBIC-LC01/MGBIC-MT01 Operating Range
Item
62.5 µm MMF
62.5 µm MMF
50 µm MMF
50 µm MMF

MGBIC-02 Specifications (1000BASE-T)

Table A-9 MGBIC-02 Specifications
Item
Supported Cable
Type:
Maximum Length
Connector
Data Rate
TX Output impedance
RX Input impedance
A-6 Specifications
Specification
1 LC fiber-optic single-mode port that is compliant with the 100BASE-FX
standard and has an LC connector.
1 LC fiber-optic single-mode port that is compliant with the 1000BASE-ELX
standard and has an LC connector.
1 LC fiber-optic single-mode port that is compliant with the 1000BASE-ELX
standard and has an LC connector.
1 LC fiber-optic single-mode port that is compliant with the 1000BASE-LX
standard and has an LC connector.
62.5 µm MMF
-9.5 dBm
-17 dBm
7.5 dBm
Modal Bandwidth @ 850 nm
160 MHz/km
200 MHz/km
400 MHz/km
500 MHz/km
Specification
Copper, Category 5 UTP
Up to 100 meters
RJ45
1 Gbps, IEEE 802.3:2000 compatible
1000BASE-T operation only
Automatic crossover detection
100 ohms, typical at all frequencies between 1 MHz and 125 MHz
100 ohms, typical at all frequencies between 1 MHz and 125 Hz
A‐21 meet or exceed the
50 µm MMF
-9.5 dBm
-17 dBm
7.5 dBm
Range
2-220 Meters
2-275 Meters
2-500 Meters
2-550 Meters