Recall And Use The Dg-Id Number Registered In The Dg-Id Memory - Yaesu FTM-3200DR Operating Manual

• Use the numeric keys on the microphone
or the DIAL knob to input the characters
of the DG-ID tag. Up to 8 characters can
be entered.
• Press the [P3] key on the microphone or
[SQL (TXPO)] key to move the cursor to
the left.
• Press the [P4] key on the microphone or
[V/M (MW)] key to move the cursor to the
right.
8. Press and hold the [P2] key on the
microphone to save the setting and return
to normal operation.
Notes:
z The DG-ID memory "00" is fixed at "T00 R00"
and cannot be changed.
z By pressing and holding the [P2] key on the
microphone in the middle of the setting, the
setting so far will write and then return to the
normal screen.
z When the [P2] key on the microphone is not
pressed while writing, after five seconds
elapse the operation will return to the normal
screen without saving the setting.

Recall and use the DG-ID number registered in the DG-ID memory

1. Press the [P1] key on the microphone,
the information of the current DG-ID is
displayed.
2. Rotate the DIAL knob to select the number
of DG-ID List to recall.
3. Press the PTT button to select the DG-
ID number and return to the frequency
display screen. Or if five seconds passes,
the selected screen will return to frequency
screen automatically.
• When using the DG-ID memory, the
tag of the DG-ID memory being used is
displayed every 5 seconds.
• If the DG-ID memory is "00", DG-ID
memory tag is not displayed.
FTM-3200DR/DE Operating Manual
Advanced Operation
DG-ID Tag display
DG-ID Number display
23