Yaesu FTM-3200DR Operating Manual page 45

Menu Item
36: SCAN RSM
Selects the Scan Resume mode.
37: SCAN SKP
Selects the Memory Scan mode.
Sets the squelch type separately for
38: SQL EXP
transmission and reception.
Selects the Tone Encoder and/or Decod-
39: SQL TYPE
er mode.
40: STEP
Sets the frequency synthesizer steps.
Indicates the current temperature inside
41: TEMP
the transceiver.
42: TONE FRQ
Setting of the CTCSS Tone Frequency.
43: TOT
Sets the Time-Out Timer.
Enables/Disables the receiver audio out-
44: TS MUTE
put while the Tone Search or DCS Search
Scanner is activated.
Selects the Tone Search or DCS Search
45: TS SPEED
Scanner speed.
46: VER DISP
Displays the transceiver software version
Enables/Disables the Weather Alert fea-
47: WX ALERT
ture.
Selects the audio output level of the
48: WX VOL
Weather Alert.
Reduction of the Microphone Gain/Devia-
49: W/N DEV
tion and receiver bandwidth.
50: W-DGID
Setting of the WIRES-X DGID
51: MY CALL
Sets your station call sign
FTM-3200DR/DE Operating Manual
Function

Setup (Menu) Mode
Available Values
BUSY / HOLD / 2-10
(SEC)
OFF / SKIP / SELECT
ON / OFF
TONE / TSQL / DCS /
RV TONE / PAGER /
OFF
AUTO / 5 / 6.25 / 10 /
12.5 / 15 / 20 / 25 / 50 /
100 (kHz)
---
67.0 to 254.1 (Hz)
0.5 to 10.0 (MIN) / OFF
ON / OFF
FAST / SLOW
CPU x.xx
DSP x.xx
ON / OFF
NOR VOL / MAX VOL
WIDE / NARROW
AUTO/DGID01-99
- - - - - - - - - -
: Depends on the transceiver version.
Default
5.0 SEC
OFF
OFF
OFF
AUTO
---
100.0 HZ
3.0 MIN
ON
FAST
---
OFF
NOR VOL
WIDE
AUTO
---
45