Contec Conprosys CPS-MC341-ADSC1-111 Reference Manual page 29

CPS-MC341-ADSC1-111, CPS-MC341-ADSC2-111, CPS-MG341-ADSC1-111 Reference Manual (Hardware)
SW3, SW4 (CPS-MC341-ADSC2-111)
CPS-MC341-ADSC2-111 has the RS-422A/485 setting up DIP switch and LED indicator. DIP switch
and LED Indicator are placed on the top of the product.
The factory default of all switches are set to "OFF".
SW4
↓
1 2 3 4
DIP Switch
SW Bit No. ON/OFF
SW4 1
2
3
4
SW3 1
2
LED Indicator (Top)
LED Color
TX Yellow
RX Yellow
—
Product Nomenclature and Function
SW3
↓
RX TX
1 2
ON Enable the TX Terminator
OFF Disabled the TX Terminator
ON Enable the RX Terminator
OFF Disable the RX Terminator
ON Internal connection state of TX+ and RX+: Short(Half Duplex)
OFF Internal connection state of TX+ and RX+: Open(Full Duplex)
ON Internal connection state of TX- and RX-: Short(Half Duplex)
OFF Internal connection state of TX- and RX-: Open(Full Duplex)
ON RTS Communication Mode: Half Duplex
OFF RTS Communication Mode: Full Duplex
- System Reservation: Always OFF
Display
Flashing
It flashes upon transmitting data by the RS-422A / 485.
Flashing
It flashes upon receiving data by the RS-422A/485.
— 29 —
—
Description
Description