Tools - Rekluse CoreManual Installation & User Manual

· Lay the bike on its left side when replacing the clutch. This
makes working on the clutch easier and eliminates the need
to drain the oil.
· Use an air or electric impact wrench to remove the center
clutch nut. If one is not available, you can place the bike in
top gear and hold the rear brake while loosening the center
clutch nut with a socket and breaker bar.
· Channel-lock pliers work best to bend the tabs of the washer
up over the center clutch nut.
· For optimal clutch performance Rekluse recommends using
fresh, clean oil that meets JASO-MA oil rating requirements.
Rekluse offers Factory Formulated Oil™ developed
specifically for Rekluse products. Rekluse Factory
Formulated Oil is a perfect complement to any OEM or
aftermarket wet clutch. Visit
· Use the torque values listed in the instructions. Otherwise,
use the torque specifications found in your OE service
manual.

TOOLS

8, 10, & 30
mm Sockets
Picks
www.rekluse.com
5mm
Hex Keys
Hammer &
Fluid Catch
Flat Chisel
Container
Doc ID: 191-7008001
Doc Rev: 080720
Metric
Wrenches
Channel-lock
to learn more.
Torque
Wrench
pliers
Pg. 3