Rekluse CoreManual Installation & User Manual page 10

3. Install the new Rekluse tab washer with the bent tabs facing
down, aligning with the holes in the hub. Only use the
supplied lock tab washer under the OE center clutch nut
when installing the hub.
4. Install the OE center clutch nut.
5. Using the socket and torque wrench, torque the center clutch
nut to 50 ft-lb (68 N-m).
Pg. 10
Rekluse tab
lock washer
Doc ID: 191-7008001A
Doc Rev: 080720
OE clutch nut