Install The Clutch Pack - Rekluse CoreManual Installation & User Manual

Note: Placing the bike in the highest gear and holding the rear
wheel by applying the rear brake keeps the shaft from rotating
when tightening the nut.
6. Using the channel-lock pliers, bend up both tabs of the tab
washer tightly around the nut. The tabs can be bent on the
straight sides or around the corners.

INSTALL THE CLUTCH PACK

1. Soak the provided friction disks in new oil for at least 5
minutes.
Doc ID: 191-7008001
Doc Rev: 080720
Pg. 11