Page 2
Components Upon unpacking your chaise from it’s delivery box, you should have two separate components (two bodies of the chaise - left body and right body). Additional components are packed inside the bodies, you will learn how to access and utilise these components in the next steps. Left body Right body Chaise bodies x 2...
Page 3
Align a leg so that the screw slot is facing inward. Step 1 Fit a washer to a bolt and use them to t the leg onto the body of the chaise. Turn the bolt with the allen key until it is secure but do not tighten yet. Repeat for all four legs.
Page 4
Step 3 Lift the chaise o the ground and turn it right side up while being careful not to put any pressure on the legs while you turn the chaise. Place the chaise on a at surface, then sit on the Step 4 chaise and shift your weight around until the legs are level and the chaise does not rock.
Page 5
Components We are now moving onto the assembly of the second component, the right body of your 3 seater chaise. Right body Unpacking With the right body of the chaise, turn it so that the underside is facing you. Follow the coloured string to the component compartment. Unzip this and take out the additional components, then zip it back up.
Page 6
Align a leg so that the screw slot is facing inward. Step 1 Fit a washer to a bolt and use them to t the leg onto the body of the chaise. Turn the bolt with the allen key until it is secure but do not tighten yet. Repeat for all four legs.
Page 7
Step 3 Place the chaise on a at surface, then sit on the chaise and shift your weight around until the legs are level and the chaise does not rock. en use the allen key to tighten all the bolts. Now that is the right body of your chaise complete.
Need help?
Do you have a question about the Evelyn 3-Seater Chaise and is the answer not in the manual?
Questions and answers