Page 2
Components Upon unpacking your armchair from it’s delivery box, you should have the body of the armchair. Additional components are packed inside the body, you will learn how to access and utilise these components in the next steps. Armchair body Unpacking Turn the armchair body so that the underside is facing you.
Page 3
Place the armchair body on a level surface with the Step 1 bottom side facing you. Place a back leg into the back leg position. Fit a washer to a bolt screw into a hole using the Allen key (F). Repeat this for the second bolt to secure the leg in it’s place.
Page 4
Remove the protection strip from the bottom edge of Step 2 the chair...
Page 5
Place the bottom cover in place to cover the bottom Step 3 of the armchair.
Page 6
Gently lift the armchair and place it upright on a level Step 4 surface. Enjoy your new armchair!
Need help?
Do you have a question about the Hillary Wingback Armchair and is the answer not in the manual?
Questions and answers