Main Control Board Dip Switch Description - HIKVISION DS-K3G411 Series Quick Start Manual

DS-K3G411 Series Tripod Turnstile Quick Start Guide
Interface Name

4.4.2 Main Control Board DIP Switch Description

You can set the device mode, switch the communication mode between RS-232 and RS-485,
initialize the device via the DIP switch on the main control board.
You can set the device mode via the 8-bit DIP switch.
You can switch the communication mode between RS-232 and RS-485 via DIP A, DIP B, DIP C, DIP E,
DIP F, and DIP I.
Terminal Name
PB_485/232-
GND
Figure 4-5 DIP Switch on Main Control Board
Color
Yellow
Black
20
Description
RS-232_TX of
Fingerprint Recorder
Accessing (Default)
Grounding