Relay Output No/Nc Settings; Alarm Relay Output Mode (No/Nc) - HIKVISION DS-K3G411 Series Quick Start Manual

DS-K3G411 Series Tripod Turnstile Quick Start Guide
2. Disconnect the power and reboot the device. The device buzzer buzzes a long beep.
3. When the beep stopped, plug the jumper cap back.
4. Disconnect the power and power on the device again.
Caution
The initialization of the device will restore all the parameters to the default setting and all the
device events are deleted.
Note
Make sure no persons are in the lane when powering on the device.

5.3 Relay Output NO/NC Settings

5.3.1 Alarm Relay Output Mode (NO/NC)

Alarm Relay Output Mode (NO):
Alarm Relay Output Mode (NC):
32