HIKVISION DS-K3G411 Series Quick Start Manual page 28

DS-K3G411 Series Tripod Turnstile Quick Start Guide
Interface Name
RS-232H
5 V Power Output
Wiegand Card Reader
1
Terminal Name
232H+
232H-
GND
5 V
GND
OK1
ERR1
Description
RS-232_RX Terminal of
QR Code Scanner
Accessing (Default)
RS-232_TX Terminal of
QR Code Scanner
Accessing (Default)
Grounding
5 V Power Output
Grounding
Indicator of Card
Reader Control Output
(Invalid Card Output)
Indicator of Card
Reader Control Output
(Valid Card Output)
17
Remark
DIP address is 4,
and the other is 3.
Card Reader 3 can
be applied together
with the card
receiver. The normal
user can
authenticate on
Card Reader 4 and
the visitor can
authenticate on
Card Reader 3.
• You can switch the
communication
mode between
RS-485 and RS-232.
For details about
the DIP switch
description, see
Main Control Board
DIP Switch
Description
Note
The terminal is for
RS-232
communication only.
You cannot switch its
communication mode.
/
Note
The Wiegand card
reader 1 refers to the
card reader (entering).