Chapter 3 Installation; Disassemble Pedestals; Install Pedestals - HIKVISION DS-K3G411 Series Quick Start Manual

DS-K3G411 Series Tripod Turnstile Quick Start Guide

3.1 Disassemble Pedestals

Before installation, you should use the key to open the pedestals.
View the pictures below to find the lock holes.

3.2 Install Pedestals

Before You Start
Prepare for the installation tools, check the device and the accessories, and clear the installation
base.
Steps
Note
• The device should be installed on the concrete surface or other non-flammable surfaces.
• No face recognition terminal installed: If the installation area is too close to the wall, make sure
the distance between the pedestal and the wall should be more than 20 mm, or the surface may
be scratched.

Chapter 3 Installation

Figure 3-1 Lock Holes
5