Wiegand Wiring; Barrier Control Wiring - HIKVISION DS-K3G411 Series Quick Start Manual

DS-K3G411 Series Tripod Turnstile Quick Start Guide

4.4.5 Wiegand Wiring

Note
Connect the OK/ERR/BZ if the access controller should control the LED and buzzer of the Wiegand
card reader.

4.4.6 Barrier Control Wiring

By default, the barrier has connected with the main control board. If possible, the device can
connect with a third party control board to control the third party barriers. Interface D1 controls
barrier opening for entrance, while interface D2 controls barrier opening for exit.
Note
The output signal is relay. The terminals cannot connect with the devices carrying voltage.
27