Initialize Device - HIKVISION DS-K3G411 Series Quick Start Manual

DS-K3G411 Series Tripod Turnstile Quick Start Guide
Note
• You can also pair the keyfob via the client software. For details, see Managing Keyfob in User
Manual of iVMS-4200 AC Client Software.
• Only one turnstile can pair the keyfob. If multiple turnstiles are in the pairing mode, the
keyfob will select only one of them to pair.
• For details about DIP switch value and meaning, see .
6. Optional: Go to System → User → Keyfob User on the remote control page of the client
software to delete the keyfob.

5.2 Initialize Device

Steps
1. Remove the jumper cap of initialization pin on the main control board.
Figure 5-1 Initialization Jumper Cap
31