Table of Contents
Advertisement
SuperWorkstation 5049A-TR User's Manual
Removing the Processor Heatsink Module (PHM) from the
Motherboard
Before removing the processor heatsink module (PHM), unplug the power cord from the
power outlet.
1. Using a T30 Torx-bit screwdriver, turn the screws on the PHM counterclockwise to
loosen them from the socket, starting with the screw marked #4 (in the sequence of 4,
3, 2, 1).
2. After all four screws are removed, wiggle the PHM gently and pull it up to remove it from
the socket.
Note: To properly remove the processor heatsink module, be sure to loosen and remove
the screws on the PHM in the sequence of 4, 3, 2, 1 as shown below.
#4
#1
Printed Triangle on Motherboard
#2
#3
Removing the screws in
the sequence of 4, 3, 2, 1
46
CPU Socket
After removing the screws,
lift the Processor Heatsink
Module off the CPU socket.
Advertisement
Table of Contents
