Answering System Settings - Panasonic KX-TG6711BX Operating Instructions Manual

Answering System
Deactivating remote operation
Press * in step 2 on "Remote access code",
page 35.
R The entered remote access code is deleted.
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts, enter
your remote access code.
3
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 36).
4
When finished, hang up.
Voice guidance
During remote operation, the unit's voice
guidance starts and prompts you to press 1
to perform a specific operation, or press 2 to
listen to more available operations.
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key Operation
1 Repeat message
(during playback)
2 Skip message
(during playback)
4 Play new messages
5 Play all messages
6 Play greeting message
7 Record greeting message
9 Stop recording
Stop playback
36
TG67xxBX_UE(en)_0125_ver101.pdf 36
Key
0
*4
*5
*6
*#
*1
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1
2
3

Answering system settings

Number of rings before the unit
answers a call
*1
You can change the number of times the
phone rings "Number of Rings" before the
unit answers a call. You can select 2 to 7
rings, or "Auto".
The default setting is "4 Rings".
"Auto": The unit's answering system answers
at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
Operation
Turn answering system off
Erase currently playing message
Erase all messages
Reset to a pre-recorded greeting
message (during greeting message
playback)
End remote operation
(or hang up)
If pressed within the first 5 seconds of a
message, the previous message is
played.
Dial your phone number from a
touch-tone phone.
Let the phone ring 15 times.
R A long beep is heard.
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 35).
2017/01/25 11:28:22