Table of Contents
Advertisement
Programming
Note:
R When the answering system answers the
call, this feature does not work.
(KX-TG6721 series: page 3)
Changing the handset name
Each handset can be given a customised
name ("Bob", "Kitchen", etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is "No". If you select
"Yes" without entering any handset name,
"Handset 1" to "Handset 2" is displayed.
1
#104
2
Enter the desired name (max. 10
characters; page 40).
R If not required, go to step 3.
3
4
MbN: Select the desired setting. a
times
5
M
N
Incoming call barring (Caller ID
subscribers only)
This feature allows the unit to reject calls from
specified phone numbers that you do not want
to answer such as junk calls.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
R When the unit receives a call from a
number that is stored in the call barred list,
the call is logged in the caller list
(page 31) with
after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
28
TG67xxBX_UE(en)_0125_ver101.pdf 28
Important:
R You must store the phone number with an
area code in the call barred list.
n From the caller list:
1
MFN ( )
2
MbN: Select the entry to be barred. a
3
MbN: "Caller Barred" a
4
MbN: "Yes" a
n By entering phone numbers:
1
#217 a
2
Enter the phone number (24 digits
max.). a
R To erase a digit, press
3
M
N
Viewing/editing/erasing bar call
numbers
2
1
#217
2
MbN: Select the desired entry.
R To exit, press M
3
To edit a number:
a Edit the phone number. a
a M
To erase a number:
a MbN: "Yes" a
Note:
R When editing, press the desired dial key to
add,
to erase.
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 31) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
"123". If you make a call from the caller list to
the phone number "123-456-7890", the unit
dials "456-7890".
a M
N
.
N.
N
a M
N
2017/01/25 11:28:22
Advertisement
Table of Contents
