Boot Configuration - Contec PT-970 A Series Reference Manual

7. Boot Configuration

Configure the settings boot devices and other devices.
Main
Boot Configuration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
Fast Boot
Boot mode select
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
▶xxxx BBS Priorities
Boot Configuration
Item
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
Fast Boot
Boot Option #x
xxxx BBS Priorities
displayed
*1 This is when there are connected devices.
—
BIOS Set up
PT-970 A/B Series Reference Manual
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Advanced Chipset
1
[On]
[Disabled]
[Disabled]
[UEFI]
[M.2]
[AP]
[USB Hard Disk]
[USB CD/DVD]
[USB Key]
[USB Floppy]
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Options
1
On / Off
Disabled / Enabled
Disabled / Enabled
XXXXXXXX
(Specify any device)
XXXXXXXX
(Specify any device)
- 54 -
—
Security Boot Save & Exit
→←:Select Screen
↑↓:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Load Defaults for Win10
F4:Save & Exit
F5:Load Defaults for Win7
ESC:Exit
Set the standby time for BIOS Setup
<DEL> or <F2> input.
Unit : [second]
Set the NumLock status when the system
starts.
Do not change this setting.
Do not change this setting.
Set the start order of the connected
devices. *1
Set the start order of the connected drives.
*1
Description