Installation Requirements - Contec PT-970 A Series Reference Manual

4. Installation Requirements

Note that there are limits to set the product depending on the conditions.
Be sure that the ambient temperature is within the range specified in the installation environment
requirement by making space between the product and device that generates heat or exhaust air.
Recommended Installation Angles
The recommended installation angle for this product is -45 degrees to +45 degrees. Installing the
product with other angles may not fulfill the temperature specifications.
Temperature Requirement
- 0 to + 40 °C
Temperature Derating
*1 Load expected by common operations. Environment: when CPU load 30%, USB power supply by 0.5A
*2 The product maximum load. Environment: when CPU load 100%, all interfaces are used
When the product is used with a load greater than 60%, set the product with some space behind
by attaching the spacer (included in the package) to the panel computer.
—
Hardware Setup
PT-970 A/B Series Reference Manual
CAUTION
- 27 -
—