Table of Contents
Advertisement
3. Hardware Setup
◆Extension Board Installation
Figure 3.2 Extension Board Installation
CAUTION
Screw holes may be damaged if screws are tightened with a torque greater than the specified
torque.The specified tightening torque is 5 - 6kgf⋅cm.
◆Installation Requirements
Be sure that the ambient temperature is within the range specified in the installation environment
requirement by making space between the product and device that generates heat or exhaust air.
Figure 3.3 Installation Image
CAUTION
Note that even though the ambient temperature is within the specified range, an operational
malfunction may occur if there is other device generating high heat; the radiation will influence the
product to increase its temperature.
VPC-500P1 Series User's Manual
Remove the screw
Pull up the extension board bracket
Remove the blank panel then install an extension board
13
Advertisement
Table of Contents
