Display Panel - HP Pavilion x360 m3 Series Maintenance And Service Manual

Display panel

NOTE: The display panel spare part number includes the TouchScreen board but does not include the
display panel cable. The display panel cable is available using spare part number 856009–001.
Description
13.3–in, (1920x1080), FHD, UWVA/IPS, white light-emitting diode (WLED), 16:9 ultra wide aspect ratio,
AntiGlare, ultra-slim-bent (2.85mm), TouchScreen, Multi-Touch enabled, eDP)
13.3–in, (1366x768), HD, UWVA/IPS, white light-emitting diode (WLED), 16:9 ultra wide aspect ratio,
AntiGlare, ultra-slim-bent (2.85mm), TouchScreen, Multi-Touch enabled, eDP)
IMPORTANT:
and replacement
Before removing the display panel, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the keyboard top cover (see
components:
a. Battery (see
b. USB port shield (see
c. System board (see
Remove the display panel from the base enclosure:
1. Remove the five Phillips 2.5×4.2 screws from the hinges (1).
CAUTION:
and possible damage to the unit.
2. Slide the display panel forward to release hinges from base enclosure (2).
60 Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Battery on page 41).
USB port shield on page
System board on page
Ensure that the panel is laid flat and fully open from the base enclosure to prevent tipping
Keyboard/top cover on page
48).
49).
Spare part number
856019–001
856018–001
33), and then remove the following