Webcam/Microphone Module - HP Pavilion x360 m3 Series Maintenance And Service Manual

Webcam/microphone module

NOTE: The webcam/microphone module spare part kit includes 2 microphone rubber isolators and double-
sided adhesive but does not include the webcam/microphone module cable. The webcam/microphone
module cable is available using spare part number 856010–001.
Description
Webcam/microphone module
Before removing the webcam/microphone module, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the keyboard top cover (see
components:
a. Battery (see
b. USB port shield (see
c. System board (see
d. Display panel (see
Remove the webcam/microphone module:
1. Loosen the adhesive (1) holding the webcam/microphone module to the display back cover.
2. Disconnect the webcam cable (2).
3. Lift the webcam/microphone module away from the display back cover (3).
Reverse this procedure to install the webcam/microphone module.
Keyboard/top cover on page
Battery on page 41).
USB port shield on page
System board on page
Display panel on page
33), and then remove the following
48).
49).
60).
Component replacement procedures
Spare part number
833962–005
65