Removing A Fan Module; Installing A Fan Module - IBM BladeCenter S Problem Determination And Service Manual

Removing a fan module

You can remove a fan module while the BladeCenter S system is powered on. To
remove it, grasp the fan handle and slide the fan module out of the BladeCenter S
chassis.
About this task
Procedure
1. Grasp the fan handle.
2. Slide the fan module out of the BladeCenter S chassis.

Installing a fan module

You can install a fan module while the BladeCenter S system is powered on. To
install it, slide the fan module into the fan module bay until the fan handle locks.
About this task
92
BladeCenter S Type 7779/8886: Problem Determination and Service Guide
Note: When you remove a fan module, the power modules will begin to run at
full speed, which will be clearly audible.
Fan
error
LED