7. Check for worn, frayed, or pinched cables.
8. Make sure that the power-supply cover fasteners (screws or rivets) have not
Safety statements
These statements provide the caution and danger information used in this
documentation.
Important:
Each caution and danger statement in this documentation is labeled with a
number. This number is used to cross reference an English-language caution or
danger statement with translated versions of the caution or danger statement in
the Safety Information document.
For example, if a caution statement is labeled "Statement 1", translations for that
caution statement are in the Safety Information document under "Statement 1".
Be sure to read all caution and danger statements in this documentation before you
perform the procedures. Read any additional safety information that comes with
your BladeCenter S system or optional device before you install the device.
Statement 1
viii
BladeCenter S Type 7779/8886: Problem Determination and Service Guide
been removed or tampered with.