Discontinuing A Measurement; Bluetooth And Bp Toolbox App; Memory Recall; A Recalling Memory In General Mode - BIOS Diagnostics PROTOCOL BD352 Instruction Manual

3.7 Discontinuing a Measurement

To stop the measurement (eg. the patient feels unwell) press the ST button. The device will immediately decrease the
cuff pressure automatically.

3.8 Bluetooth and BP Toolbox App

The App will work with the following operating systems:
iOS Support: iPhone 5, iPhone 5s, iPhone 6, iPhone 6p, 6s, 6sP, iOS 7.1 and up, Bluetooth 4.0
Android: System 4.3 and up, Bluetooth 4.0
1. To begin using the free BP Toolbox App, download and install onto your smartphone or tablet.
2. Turn ON Bluetooth on your device.
3. Open the BP Toolbox App. You will need to register and create a password.
Note: If you have another BIOS Diagnostics Bluetooth product and APP, you
have to create a differeny username and password.
4. Once in the App, select Menu
5. Next, scroll down on the Menu to Patient Info and fill out your information and
press SAVE.
6. You can now sync your Blood Pressure monitor to the App. On the BP monitor,
press the ST button, all symbols will appear on the screen, right after " " will
flash on the monitor. On the App, go to Settings
and press Scan For Devices to connect the BP monitor (see figures 1-4). The
name of the BP monitor should appear on the screen, select the Blood Pressure
monitor name and press Confirm. The Blood Pressure monitor and App should
successfully connect.
7. If connection is successful, the BP monitor will sync to the App and the memory
from the monitor will download onto the App.
NOTE: You should see the memory count down on the BP monitor as its
downloading the measurements to the App. If there are no measurements this will not happen.
8. Once the memory download is complete, you can take your measurement. When the measurement is completed
the monitor will sync with the App automatically.
NOTE: For more information on the App and how to use it, visit our website www.biosmedical.com or call our BIOS
Medical Hotline: 1-866-536-2289

3.9 Memory Recall

This blood pressure monitor automatically stores 90 measurements for each user in its memory. The 90 memories are
split between the two modes: 28 memories in 7d Mode and 62 memories in
General Mode. The oldest record will be replaced by the latest measurement
value when there are more than 90 sets for each user.

3.9A Recalling Memory in General Mode

First select General Mode, with the unit off press the MEM button to see the
most recent measurement value. Subsequent measurements can be displayed
one after the other by continuously pressing the MEM button.
BP Toolbox
Settings Select User. Select User 1 or 2
scroll down to Bluetooth
Figure 1 Figure 2
Figure 3 Figure 4