Discontinuing A Measurement; Bluetooth And Bpiq App - BIOS Diagnostics PROTOCOL PRECISION 12.0 Instruction Manual

Project Type
Instructions
UPC (For Reference Only)
sufficient, the device automatically re-inflates to a higher pressure.
3. When the device detects a heartbeat, the heart symbol " " on the display starts to flash
for every heartbeat.
4. When the measurement has been completed, you will hear a long beep and the systolic,
diastolic and pulse rate will appear on the display.
5. The measurement readings remain on the display until you switch off the device. If no
button is pressed, the device switches itself off in 3 minutes.
NOTE: The symbol " " will be displayed along with the reading if irregular heartbeat has
been detected during the measurement. If the " " symbol appears frequently (e.g. several
times in a week), it may be an indication of a more serious heart problem, and you should
consult your doctor.

3.7 Discontinuing a Measurement

To stop the measurement (eg. the patient feels unwell) press the START/STOP button. The
device will immediately decrease the cuff pressure automatically.

3.8 Bluetooth and BPiQ App

The App will work with the following operating systems:
iOS Support: iPhone 5s, iPhone 6, iPhone 6p, 6s, 6sP, 7.1 and up,
Bluetooth 4.0 required.
Android: Version 6 and up, Bluetooth 4.0 required.
1. To begin using the free BPiQ App, download and install onto your
smartphone or tablet.
2. Turn ON Bluetooth on your device.
3. Open the BPiQ App. You will need to register and create a password.
4. Once in the App, select Menu
5. Next, scroll down on the Menu to Patient Info and fill out your information and press SAVE.
6. You can now sync your Blood Pressure monitor to the App. On the BP monitor, press the
START/STOP button, all symbols will appear on the screen, right after "bt" will flash on
the monitor. On the App, go to Settings
Date: February 12 2021
Customer: Thermor Ltd
Job Number: TH6151
Item Number: BD353
Designer: Alex Vranjesevic
Reason For Project:
Artwork is not to be amended or scaled. If any changes
New Item:
are required please send through Thermor office with
New Branding:
instructions, and we will amend here and resend artwork
Design Update:
through. PLEASE RETURN WITH SIGNATURE
N/A: X
BPiQ
Settings
scroll down to Bluetooth and press Scan For
Revision: C
Contact: Graphic's Department
graphics@thermor-ins.com
Colour Breakdown
Select User. Select User 1 or 2
Figure 1 Figure 2
Figure 3 Figure 4