Introduction - NTI Triton VS80 Assembly, Installation And Operation Instructions

VS80-130

1.0 INTRODUCTION

General Installation Requirements
The installation of your NTI Triton oil boiler shall be in accordance with these instructions and the regulations of
the authorities having jurisdiction and must comply with the following codes and standards:
United States
 State and local plumbing, heating, and electrical codes
 NFPA 70 National Electric Code
 NFPA 31 Installation Code for Oil Burning Equipment
 Standard ANSI/ASME CSD-1, Controls and Safety Devices for Automatically Fired Boilers (if applicable)
Canada
 Provincial and local plumbing, heating, and electrical codes
 CSA C22.1 Canadian Electrical Code Part One
 CSA B139 Installation Code for Oil Burning Equipment
The Triton boiler is a knock-down boiler constructed of carbon steel. The venting application needs to be decided
in advance, either Natural Draft or Direct Vent, prior to ordering the boiler as burner packages will vary
depending on the venting application. The boiler package comes in three sections and requires field assembly.
Check your boiler package when it arrives and ensure it includes the following:
1. Boiler
2. Jacket
3. Burner Kit
This document pertains to the correct installation and operation of NTI Triton oil boilers. The instructions
detailed in this document supersede any and all previous instructions provided by NTI, written or otherwise. The
warranty is included in the Installation and Operation Instructions. Each unit comes complete with the following
documentation:
1. Installation and Operating Instructions
2. Users Manual
Read and understand this entire document prior to proceeding with the installation of the
Triton. Failure to follow the instructions outlined in this document will result in property
damage, serious injury or death.
User Responsibilities
This boiler must be installed and serviced by a qualified installer or service technician. This boiler must be
serviced and inspected annually. As the User/Owner of this equipment, you are responsible for ensuring the
maintenance is performed at the required intervals. See "Users Manual".
Failure to have the boiler properly serviced and inspected on a regular basis by a qualified
service technician may result in property damage, serious injury or death.
Installer Responsibilities
As the installing technician it is your responsibility to ensure the installation is performed in accordance with this
instruction manual as well as any applicable local or National installation codes. It is also your responsibility to
inform the User/Owner of their obligation with respect to the above description under "User Responsibilities".
Failure to follow this warning could result in fire, serious injury, or death.
Energy Saving Feature - This boiler is equipped with a feature that saves energy by
reducing the boiler water temperature as the heating load decreases. This feature is
equipped with an override which is provided primarily to permit the use of an external energy management
system that serves the same function. THIS OVERRIDE MUST NOT BE USED UNLESS AT LEAST ONE
OF THE FOLLOWING CONDITIONS IS TRUE :
 An external energy management system is installed that reduces the boiler water temperature as the heating
load decreases.
 This boiler is not used for any space heating.
 This boiler is part of a modular or multiple boiler system having a total input of 300,000 BTU/hr or greater.
 This boiler is equipped with a tankless coil.
Introduction - Installation & Operation Instructions
│
Triton
3