Introduction - NTI FTG 600 Installation And Operation Manual

FTG

1.0 INTRODUCTION

General Installation Requirements
The installation of your NTI FTG gas boiler must conform to the requirements of this manual, your local
authority, and the National Fuel Gas Code ANSI Z223.1 and or CAN/CGA B149 Installation Codes. Where
required by the Authority, the installation must conform to the standard for "Controls and Safety Devices for
Automatically Fired Boilers ANSI/ASME CSD-1."
This document pertains to the correct installation and operation of NTI FTG boiler models FTG 600, FTG 800,
FTG 1200, FTG 1400, FTG 2000, FTG 2200 and FTG 2400. The instructions detailed in this document
supersede any and all previous instructions provided by NTI, written or otherwise. Each unit is provided with the
following:
1. Installation and Operation Manual,
2. Appendix A – Controller and Touchscreen Display Instructions,
3. FTG Users' Manual, and
4. Natural Gas to LP Conversion Kit*
* The conversion kit is required to convert the boiler so it will safely operate with Propane Gas.
Read and understand this entire document prior to proceeding with the installation of the
FTG boiler. Failure to follow the instructions outlined in this document will result in
property damage, serious injury or death.
User Responsibilities
This boiler must be installed and serviced by a qualified installer or service technician. This boiler must be
serviced and inspected annually when operating in normal residential applications. Demanding applications or
extreme conditions (i.e. when operating with LP-Propane) may require more frequent service and inspection. As
the User/Owner of this equipment, you are responsible for ensuring the maintenance is performed at the required
intervals (see Section 15.0 – Annual Maintenance and Inspection).
Failure to have the boiler properly serviced and inspected on a regular basis by a qualified
service technician may result in property damage, serious injury or death.
Failure to keep the Vent and Combustion Air Intake clear of ice, snow, and other debris
may result in property damage, serious injury, or death.
Installer Responsibilities
As the installing technician it is your responsibility to ensure the installation is performed in accordance with this
instruction manual as well as any applicable local or National installation codes. It is also your responsibility to
inform the User/Owner of their obligation with respect to the above description under "User Responsibilities."
Failure to follow this warning could result in fire, serious injury, or death.
│Installation & Operation Manual
3