Initializing The Pairing List Of The Ip501H/Ip503H - Icom IP503H Instruction Manual

5
OPTIONAL PRODUCTS

■ Initializing the pairing list of the IP501H/IP503H

If you have some troubles with the Bluetooth operation, initialize the pairing list, as shown below.
LAll the paired Bluetooth devices are deleted from the pairing list by the initialization.
LThe pairing list is not initialized by the "RESET" item in the Set mode.
1. While hold down [FUNC] and [Address], turn ON the power.
• Enters the Set mode.
2. Release [FUNC] and [Address] when "SET" is displayed.
3. Push [FUNC] several times to select "Initialize Bluetooth Unit."
4. Push [▲]/[▼] to select "YES."
• To cancel the initialization, push any key other than [Call history].
5. Push [Call history].
• The pairing list is initialized and the transceiver automatically restarts.
[Address]
[ア ドレス帳]キー
[Call history]
[履歴]キー
[電源/音量]ツマミ
[PWR/VOL]
[FUNC]キー
[FUNC]
[▲]/[▼]
[▲]/[▼]キー
5-22
SET
LOG
– – –
SET
Init BT Unit
YES