Icom IP503H Instruction Manual page 35

4
SET MODE
■ Setting item list (continued)
The shaded items (■ ■) are also displayed in the Basic Set mode.
LItems or default values may differ according to a presetting. Ask your dealer for details.
Item Description
Displays the call-to party (call type) on the stand-
by screen.
Destination ID
L If "Disable" is selected, the call-to party (call
Bluetooth Sets the Bluetooth function.
BT Auto Connect Automatically connects a Bluetooth device.
Sets the audio volume setting type for a Bluetooth
headset.
BT Sync Vol.
L When "Enable" is selected, the Bluetooth
Sets the Synchronous Connection-Oriented
(SCO) link* connection type of a Bluetooth
headset.
When "Auto Disconnect" is selected, the SCO
link is automatically disconnected after two
BT Connect Type seconds.
* A Bluetooth link for voice communication
L This setting is valid only when a Bluetooth
L When this item is set to "Auto Disconnect," the
Enables the user to select which microphone to
use.
PTT & Mic Switch
L When this item is set to "Auto," Transmits the
Sets the Echo Cancelling function for a Bluetooth
BT Echo Canceller
headset.
Sets the Echo Canceller input gain for a Blue-
BT E-Cancel Gain
tooth headset.
Sets the Echo Canceller delay for a Bluetooth
BT E-Cancel Delay
headset.
Sets the Noise Cancelling function for a Blue-
BT Noise Cancel
tooth headset.
Sets the Power Save function for a Bluetooth
headset.
L When "Enable" is selected, the Power Save
BT Power Save
10/4 12:57
All
Call-to paty (call type)
type) that is preset by your dealer is displayed
on the standby screen.
headset volume can be set by [PWR/VOL].
device other than VS-3 or BC-218 is used.
VOX function is not usable.
audio from the device whose [PTT] is pushed.
function automatically activates after 2 minutes
of no communication.
• When a call is received, this function is
cancelled.
• This function is cancelled when pushing
[PTT]. Push [PTT] again to talk.
Option/range
Disable, Transmit,
Transmit and Receive or
All Operations
Disable or Enable
Enable or Disable
Disable or Enable
Always Connect or Auto Dis-
connect
Auto, Radio Mic or Bluetooth
Mic
Disable or Enable
–40 dB ~ +40 dB
0milliseconds ~ 160milliseconds
Disable or Enable
Enable or Disable
4-6
Default
Disable
Disable
Enable
Disable
Always Con-
nect
Auto
Enable
0 dB
70millisec-
onds
Enable
Disable