Pocket Beep Function; P-Bell Function - Icom IP503H Instruction Manual

3
ADVANCED OPERATION

■ Pocket Beep function

The Pocket beep function sounds a notification tone and
indication when a call is received.
L This function is set by your dealer, or in the Set mode.
(p. 4-4)
L When the Pocket Beep function is ON, "
displayed.
• When a call is received, the notification beep sounds
and " " blinks
.
10/4 12:58
All
Standby screen
Blinks
10/4 12:58
Sales1
When an Individual call is received

■ P-Bell function

The P-Bell function sounds the notification tone when a
call is received.
The
L This function is set by your dealer, or in the Set mode.
" is (p. 4-4)
L You cannot listen to the call until you reply to the call.
After pushing [PTT], the mute is released.
3-10
icon is displayed when the P-Bell function is used.
10/4 12:58
All
Standby screen