Operation Of The Switchgear; Safety Instructions; Control Elements And Indicators - Siemens 8BT2 Installation And Operating Instructions Manual

6.

OPERATION OF THE SWITCHGEAR

6.1.

Safety instructions

6.2.

Control elements and indicators

Fig81. Control elements, circuit-breaker panel
72
DANGER!
High voltage! Danger!
Do not touch live components.
Ensure that the switchgear is only operated by qualified personnel who are familiar
with the operating instructions and observe the warnings.
Observe the Five Safety Rules (see Page 4, clause 1.2, "General instructions").
DANGER!
During operation of electrical equipment and switchgear, parts of this equipment are
under dangerous electrical voltage. Mechanical components may move quickly, even
remotely controlled.
Do not remove covers.
Do not reach into openings.
Do not touch circuit breaker poles and operating rods.
DANGER!
Danger by non-observence of local regulations
In addition to these operating instructions, the instructions of the switchgear
operator must be carried out.
For working in the switchgear, the operator must create the operational work
instructions.
NOTE!
Perfect and safe operation of the switchgear
The perfect and safe operation of this switchgear is conditional on correct erection
and installation according to the installation instructions.
Revision 04 * INSTALLATION AND OPERATING INSTRUCTIONS 8BT2 * 881-4027.9