Siemens 8BT2 Installation And Operating Instructions Manual page 79

Push the hand crank for racking the switching
device truck onto operating shaft (pos.nr.
fig87) and turn clockwise as far as it will go.
Remove the hand crank for racking the switching
device truck.
Turn the double-bit key 90° clockwise to the
"SERVICE pos'n locked" position (SERVICE position
interlocked).
Remove the double-bit key.
Result
to SERVICE position.
881-4027.9 * INSTALLATION AND OPERATING INSTRUCTIONS 8BT2 * Revision 04
The switching device truck was racked from TEST
Push the hand crank for racking the switching
in
device truck onto operating shaft (pos.nr.
fig87) and turn counter-clockwise as far as it will go.
Remove the hand crank for racking the switching
device truck.
Turn the double-bit key 90° counter-clockwise to the
"Test pos'n locked" position (TEST position
interlocked).
Remove the double-bit key.
The switching device truck was racked from
SERVICE to TEST position.
in
79