Welbilt Frymaster YUM K3000 Operation Manual page 7

1.4 K3000 Setup Mode cont.
Left Display Right Display
2 polish start tempr 300F
Exit Exit
E-Log
Blank
NOW Time/date
A E# Time/date
Exit Exit
C-Log
Blank
Exit Exit
Change password
Blank
Product setup Current code
(1724)
Vat setup Current code
(3228)
Exit Exit
Edit alarm names
Blank
Alarm 1 NUM1
Exit Exit
1.5 Navigating Filter Menu
The K3000 has five functions in the Filter Menu: Filter, Clean, Dispose, Fill Vat from Pan and Drain to Pan. They are
accessed by pressing and holding the Filter button until FILTER is displayed. The first matrix below steps through the
initial navigation. Navigation of the functions are covered in separate matrices. The Controller must be on and at
setpoint to use all the functions of the filter menu. If the fryer is not at setpoint the Controller displays WAIT FOR
FILTER.
Entering Filter Mode
Left Display Right Display
DROP DROP
filter Blank
Use numbered buttons to change temperature (use 10 for 0). (This is the
required temperature for the second polish to begin.) Press .
Press  button once and press  to scroll to System, Time/Date, Filter, E-
Log, Change Password or Edit Alarm Names. With desired choice displayed,
press  or press the Scan button once to return the Controller to OFF.
Press . (This is a log of the ten most recent error codes.)
Press . (Current time and date)
Errors listed A-J. Press  to scroll through errors. If no errors exist, pressing
 will display No Errors.
Press  button once and press  to scroll to System, Time/Date, Filter, E-
Log, Change Password or Edit Alarm Names. With desired choice displayed,
press  or press the Scan button once to return the Controller to OFF.
Press . (This is a reserved internal data collection feature that only exists in
pressure fryers.)
Press  button once and press  to scroll to System, Time/Date, Filter, E-
Log, Change Password or Edit Alarm Names. With desired choice displayed,
press  or press the Scan button once to return the Controller to OFF.
Press .
Use numbered buttons to change code (use 10 for 0). Press .
Use numbered buttons to change code (use 10 for 0). Press .
Press  button once and press  to scroll to System, Time/Date, Filter, E-
Log, Change Password or Edit Alarm Names. With desired choice displayed,
press  or press the Scan button once to return the Controller to OFF.
Press .
Enter or edit alarm name with letter buttons. Press . Continue scrolling
through names up to alarm 10. (Ex. Shake, Stir, etc.)
Press  button once and press  to scroll to System, Time/Date, Filter, E-
Log, Change Password or Edit Alarm Names. With desired choice displayed,
press  or press the Scan button once to return the Controller to OFF.
Press and hold the filter button until Filter is displayed.
Press  to scroll to choices: Filter, Dispose and Exit. With the desired choice
displayed press . Follow the instructions below to navigate the modes.
1-6
Action
Action