Table of Contents
Advertisement
1.9.2 Alarm Programming Overview
Alarms are set to remind operators to shake fry baskets or tend to the product in some other way at
points during the cook cycle. The instructions below detail setting three alarms in a 13-minute cook
cycle. To enter a single alarm, exit the sequence after setting the first alarm.
Three alarms can be programmed for a cook cycle. The K3000 counts down cook times from
the total time to zero. Alarms are entered at the point in the countdown they are desired. The
example below is for alarms at 11:00, 6:00 and 2:00 on the countdown clock; the alarms will
occur two, seven and 11 minutes into the 13-minute cook cycle.
11:00
1:
At the Alarm 1
prompt, enter
At the Alarm 2 prompt,
11:00. The alarm
will occur with 11
enter 6:00, The alarm will
minutes remaining
occur with 6:00 remaining
in the cook cycle;
in the cook cycle; seven
two minutes have
minutes have passed.
passed.
2:00
Points in the cook cycle the alarms occur
6:00
2:
7:00
2:00
3:
At the Alarm 3
prompt, enter 2:00.
The alarm will
occur with 2:00
remaining in the
cook cycle; 11
minutes have
passed.
11:00
1-13
Cook
cycle
ends
13:00
Advertisement
Table of Contents
