Welbilt Frymaster YUM K3000 Operation Manual page 16

1.10 Programming for Multi-Setpoint (Segmented) Items cont.
Left Display Right Display
5 Time :00 or previously entered time
1 Alarm time :00 or previously entered time
1 Alarm Name SHAKE
1 alarm mode Manual or auto
1 Alarm Tone Short, medium, long double or
long short, none
2 Alarm time Time
2 Alarm name name
2 alarm mode Manual or auto
2 Alarm Tone Short, medium, long double or
long short, none
3 Alarm time name
3 alarm Mode Manual or auto
3 Alarm Tone Short, medium, long double or
long short, none
After cooking Set Point or cool
Filter Lockout 0
QUANTITY? No
Head count User prompt 00
Instant ON 0
Exit Exit
Select Product Blank
OFF OFF
Action
Leave at zero if no more segments are needed and
press . If more segments are needed, 5 is the limit,
continue programming as shown above.
Subtract the time from the starting cook time when the
alarm should sound. (Example: If a cook time is 5:00
and the shake time should be 30 seconds into the cook
time enter 4:30 as the alarm time). Enter that time for
shaking, stirring, etc. Press .
Press  to scroll through choices: Shake, Stir, Num1.
With NUM 1 displayed, scroll through number
choices with . Display name and press .
Choose mode with  and press .
Choose tone with  and press .
Subtract the time from the starting cook time when the
second alarm should sound. (Example: If a cook time
is 5:00 and the shake time should be 30 seconds into
the cook time enter 4:30 as the alarm time). Enter that
time for shaking, stirring, etc. Press .
Press  to scroll through choices and press .
Choose mode with  and press .
Choose tone with  and press .
Subtract the time from the starting cook time when the
third alarm should sound. (Example: If a cook time is
5:00 and the shake time should be 30 seconds into the
cook time enter 4:30 as the alarm time). Enter that
time for shaking, stirring, etc. Press .
Choose mode with  and press .
Choose tone with  and press .
Choose fryer status after cook cycle with  and
press .
Enter number of cook cycles before a filter prompt
and press .
Press  to scroll to YES if a quantity per load is
required, otherwise leave to default NO.
Enter chicken head count or equivalent number for
non-chicken item and press .
This is the time, in seconds, the fryer heats before the
Controller checks the temperature. Enter value and
press .
Press .
Press Scan twice. Display goes to OFF.
1-15