Table of Contents
Advertisement
1.8 Programming for Single Setpoint (Non-Segmented) Items
Programming for non-segmented food items is shown below. The right column has the action necessary to continue. Exit
from a programming step at any time by pressing the Scan button until the display returns to its pre-programming status.
Left Display
OFF
Product Setup
Blank
Product Setup
Enter Code
Select Product
Blank
Long Name
Product name or button
number
Short Name
Abbreviated Product name or
button number
COOKING MODE
SINGLE SETPOINT
1 Time
0:00 or previously entered time
1 TempR
Temp
1 Flex
Number
1 PRESSURE
OPEN
SOLENOID
2 Time
0:00 or previously entered time
1 Alarm TIME
0:00 or previously entered time
1 alarm name
shake
1 ALARM MODE
AUTO OR MANUAL
1 alarm tone
Short, medium, long double or
long short, none
2 alarm time
0:00
After Cooking
Cool or Setpt
Filter Lockout
0
QUANTITY?
No
Head Count
0 or previously set number
Instant On
0
Exit
Exit
Select Product
Blank
Product Setup
Blank
OFF
OFF
Right Display
OFF
Press and hold until Product Setup is displayed.
Press .
Enter 1724.
Press desired product button 1-20 that is not currently used to program
new product otherwise press a product button that is not lit.
Enter product name with letter buttons. Advance cursor with .
Press .
Enter abbreviated four character product name with letter buttons.
Press .
Press . If multiple setpoint or segmented cooking is desired press
MULTIPLE SETPOINT and go to 1.9 and follow the instructions.
(Default is SINGLE SETPOINT)
Enter total cook time with numbered buttons. Press .
Enter cooking temperature. Press .
Enter the level of flex, 0-9, for the product. Press .
Set to desired position with the buttons. Press the button to
change to CLOSED. (Option only for pressure fryers.)
Enter 0:00. Press .
Subtract the time from the starting cook time when the alarm should
sound. (Example: If a cook time is 5:00 and the shake time should be
30 seconds into the cook time enter 4:30 as the alarm time). Enter that
time for shaking, stirring, etc. Press . (Note: If alarm time is set to
0:00 skip to After Cooking below.)
Press to scroll through the alarm names (ex. Shake). Press .
Press to scroll to Auto or Manual alarm mode. Press .
Press to scroll to choice of alarm tones. Press .
Press . Leave at 0:00 for non-segmented cooking.
Press to scroll to Cool or Setpoint mode the fryer should exit to
after cook cycle: cool = 250; Setpoint = cooking temp. Press .
Enter number of cook cycles before a filter prompt and press .
Press to scroll to YES if a quantity per load is required, otherwise
leave to default NO.
Enter number of head or the equivalent value for the product. Press .
This is the time, in seconds, the fryer heats before the Controller
checks the temperature. Enter value and press .
Press Scan button to exit or the button for additional programming.
More Programming? Press product button and follow instructions
above. Exit Programming? Press Scan Button.
Press Scan button to exit or the button for additional programming.
1-11
Action
Advertisement
Table of Contents
